Bob Smith Industries SLOW-CURE 30 Minute Epoxy (4 1/2oz)

Bob Smith Industries SLOW-CURE 30 Minute Epoxy (4 1/2oz)

  • $13.00
    Prix unitaire par 


SLOW-CURE 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE can be used for bonding if you're willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE and FINISH-CURE to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.

Works Best On:

  • Glass & Metal
  • White Foam
  • Water-Resistant
  • Reinforcing

Works Good On:

  • Balsa Wood
  • Soft Wood
  • Hard Wood
  • Fiberglass
  • Hard Plastics
  • Laminating

Directions:

SLOW-CURE 30 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.

SLOW-CURE has the highest strength of our epoxies and should be applied in temperatures above 70Ă‚ÂşF. SLOW-CURE maintains it's strength in both the lowest and highest temperature ranges of our line of epoxies.

SLOW-CURE bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. SLOW-CURE works best for forming reinforcing fillets on joints and can be mixed with microballons or other fillers to form putty-like consistency. SLOW-CURE is waterproof and forms superior bonds if you're willing to wait overnight. It has better penetration of porous surfaces for better bonding. Full cure in 6-8 hours.